Wrong Top-Of-Form Position - Epson LQ-570e User Manual

Wrong top-of-form position

Printing starts too high or low on the page.
Cause
The paper size setting in your
application software or
printer driver does not match
the size of the paper you are
using.
The printer's page length
settings for the tractor do not
match the size of the
continuous paper you are
using.
The top margin or top-of-
form position setting is
incorrect.
The printer you want to use is
not selected in your software.
You moved the paper using
the knob while the printer
was on.
c
Caution:
Never use the knob to adjust the top-of-form position; this may damage the
printer or cause it to lose the top-of-form position.
What to do
Check the paper size setting in your
application or printer driver.
Check the page length settings for the
tractor using the printer's default-
setting mode or the EPSON Remote!
utility. See "About Your Printer's
Default Settings" on page 5-4 or "Using
the EPSON Remote! Utility" on page
4-30.
Check the margin or top-of-form
position setting in your application
software. See the printable area
specifications in Appendix C.
Adjust the top-of-form position in
micro adjust mode. Be aware, however,
that settings made in Windows
applications override settings made in
micro adjust mode. See "Adjusting the
Top-of-Form Position" on page 2-31.
Choose the correct printer from the
Windows desktop or in your
application before printing.
Adjust the top-of-form position using
the micro adjust feature. See
"Adjusting the Top-of-Form Position"
on page 2-31.
Troubleshooting
7
7-9