Basic Operation; Refrigerators - Turbo Air MSR-23NM Installation And Operation Manual

BASIC OPERATION

REFRIGERATORS

1. Plug in and turn on the power switch located on the bottom of the top grille right side.
The Display panel will be lighted and make a beep sound. The compressor will begin
to run.
2. The default temperature setting is No. "5".
3. The compressor is automatically cycled by the electronic controller (PCB, D-Sensor).
4. The Defrost cycle is automatically controlled by the R-sensor, and the PCB.
5. Set level toward "1" for higher temperature and toward "9" for lower temperature.
6. The interior light is activated by the rocker switch at the bottom of the grille when the
door is opened. (MSR-23NM,MSR-49NM)
7. Evaporator fan motor(s) will run after all doors are completely closed.
MSR-23NM MSR-23G-1
MSR-49NM MSR-49G-2
MSR-72G-3
5
Turbo air