Basic Operation - Turbo Air M3R47-2-N-AL Installation And Operation Manual

BASIC OPERATION

REFRIGERATORS
1. Plug in and turn on the power switch located on the control box. The Display
panel will be lighted and make a beep sound. The compressor will begin to run.
2. The default temperature setting is No. "4".
3. The compressor is automatically cycled by the electronic controller (PCB, RD-Sensor).
4. The Defrost cycle is automatically controlled by the PCB.
5. Set level toward "1" for higher temperature and toward "7" for lower temperature.
6. The interior light is activated by the switch at the bottom of the grille when
the door is opened.
7. Evaporator fan motor(s) will run after all doors are completely closed.
DISPLAY PANEL OF REFRIGERATOR
TEMP. SETTING
M3R19-1-N
M3R24-1-N
M3R24-2-N
M3R24-2-N-L
INNER TEMP.
TEMPERATURE
M3R47-2-N M3R72-3-N
M3R47-2-N-AL M3R72-3-N-AL
M3R47-2-N-AR M3R72-3-N-AR
M3R47-4-N M3R72-6-N
TEMP. CONTROL BUTTON
(SEE PAGE 14)
(SEE PAGE 14)
13
M3R24-1-G-N
M3R24-1-G-N-L
M3R47-2-G-N
TEMPERATURE
TURBO POWER
COOLING