Basic Operation - Turbo Air TIDC-26 N Series Installation And Operation Manual

BASIC OPERATION

SV checking and setting
RUN
Display current temperature.
MD
S
U
Display "Su" when pressing [MD]
– 2
SV checking
and setting
MD
• When there is no input for 60 sec, it returns to operation mode.
• When pressing [MD] key for set value display, it returns to operation mode.
• When pressing [▼] key for "0.0" , minus values are available to set.
• Press and hold the (up) and (down) key to adjust the values quicker.
• A set value flickers every 0.5 sec, and values
can be adjusted by pressing the [▲] or [▼]
key.
• When pressing [MD] key, a set value is saved
– 3
and it returns to operation mode.
MD
17
Turbo air