FOR REFRIGERATORS
BASIC OPERATION
TSR-23SD-N6
TSR-35SD-N
TSR-49SD-N6
TSR-72SD-N
1. Plug in and turn on the power switch located on the bottom of the top grille right
side. The Display panel will be lighted and make a beep sound. The compressor
will begin to run.
2. The default temperature setting is No. "5".
3. The compressor is automatically cycled by the electronic controller
(PCB, R-Sensor).
4. The Defrost cycle is automatically controlled by the D-sensor, and the PCB.
5. Set level toward "1" for higher temperature and toward "9" for lower
temperature.
6. The interior light is activated when the door is opened.
7. Evaporator fan motor(s) will run after all doors are completely closed.
REFRIGERATORS
13