Auto Continue - Kyocera KM-1650 Advanced Operation Manual

Auto Continue

ADVANCED OPERATION GUIDE
If any of the following error messages appear, the error can be cleared and
printing can be continued after the preset recovery time elapses (auto
continue).
• Memory Overflow
• Print overrun
• KPDL error
• File not found
• HARD DISK error
• RAM disk error
• MemoryCard err
• Illegal Account
• Exceeded Max.out
• Account error
• Duplex disabled
• Add Staples
• e-MPS not stored
• Opt. ROM error
You can also set the time that elapses before Auto Continue is activated.
1 Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2
Press or to select Auto
Continue and press [Enter].
3 Press or to select On or Off
and press [Enter]. If you have
selected On, Change # displays.
4
To set the time that elapses
before Auto Continue is activated,
press or to select Change #
and press [Enter].
The Auto Continue (time) screen displays.
5
Press < or > to select the time, 0
to 495 seconds in 5 second
increments can be selected.
Press [Enter].
6
Press [Reset]. The Printer Basic screen displays.
Printer Settings
Others
Printer Reset
Resource Prot.
Auto Continue
Auto Continue
Back
On
Off
Auto Continue
On
Off
Change #
Auto Continue (Time)
30 sec. (0 495)
2-51