Auto Cassette Switching - Kyocera KM-1650 Advanced Operation Manual

System Settings

Auto Cassette Switching

Paper Size (cassettes 1 to 4)
3-16
If multiple cassettes contain the same size paper and the paper in one
cassette runs out during copying, the Automatic Cassette Switching
function will switch paper feed from the empty cassette to another cassette
containing paper of the same size and orientation.
To prohibit switching to a cassette that has a different paper type, select
On/Only Same Paper Type.
NOTE:
To use this function on the 16 ppm model, the Optional Paper
Feeder must be installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press or to select Auto
Cassette SW and press [Enter].
3
Press or to select On/All
types of paper, On/Only same
paper type, or Off and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Use to set the paper sizes for cassettes 1 to 4. To detect the paper size
automatically, set to Auto Detection Metric or Auto Detection Inch.
NOTE:
For the 16 ppm model, cassettes 2 to 4 are included in the
optional paper feeder. For the 20 and 25 ppm model, cassettes 3 and 4
are included in the optional Paper Feeder. This setting is displayed only if
the optional Paper Feeder is installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
A Paper Size option is available
for each cassette. Press
to select the Paper Size option
required, and press [Enter].
3
Press or to select Auto
Detection Metric, Auto Detection
Inch or a paper size and press
[Enter].
Machine Default:
End
Auto Cassette SW
Paper Size(1st)
Automatic Cassette Switching:
Off
*
On/All types of paper
On/Only same paper type
Machine Default:
or
End
Auto Cassette SW
Paper Size(1st)
Paper Size (1st cassette):
Auto Detection Metric
Auto Detection Inch
*
ADVANCED OPERATION GUIDE
:
On
: Auto I
:
On
: Auto I