Kyocera KM-1650 Advanced Operation Manual page 151

Appendix
CD-ROM supplied with the printer. Install the printer driver on the computer
connected to the printer.
Sleep mode This mode is provided to save power. It is activated when the machine is
not used for a preset period of time.In this mode, power is reduced to the
minimum. The default time period is 30 minutes. The default setting can be
changed.
SMTP (Simple Mail Transfer This is a protocol for the transmission of e-mail over the Internet or an
Protocol) intranet. It is used for transferring mail between mail servers as well as for
sending mail from each client to their server.
SNMP (Simple Network This is a protocol for the management of networks that use TCP/IP
Management Protocol) (Transmission Control Protocol/Internet Protocol).
Status page This lists machine conditions, such as the machine's memory, the total
number of prints and scans, and paper source settings. You can print the
status page from the operation panel.
Subnet Mask This is a 32-bit numerical value that defines which bits of the IP address
specify the network address and which specify the host address.
TCP/IP (Transmission Control TCP/IP is a suite of protocols designed to define the way computers and
Protocol/Internet Protocol) other devices communicate with each other over a network.
USB (Universal Serial Bus) An interface standard for low to middle speed serial interfaces. This printer
supports Hi-Speed USB 2.0. The maximum transfer rate is 480 Mbps and
the maximum cable length is 5 meters (16 feet).
ADVANCED OPERATION GUIDE Appendix-19