Original Orientation; Auto Sleep Time - Kyocera KM-1650 Advanced Operation Manual

System Settings

Original Orientation

Auto Sleep Time

3-20
1 Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press or to select Special P.
type and press [Enter].
3 Press or to select Match
Print Direction or Fast Mode and
press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Use to set the default Original Orientation.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2 Press or to select Orig.
direction and press [Enter].
3
Press or to select Rear or
Left top and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Use to set the time that elapses before the Auto Sleep function is activated
if the function has been enabled.
Time that can be set:
• Inch Specification — 1 to 240 minutes (in 1 minute increments)
• Metric Specification — 1 to 120 minutes (in 1 minute increments)
NOTE:
It is recommended to set a longer time if you use the machine
frequently.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
Machine Default:
P. Type (Weight)
P. Type (2sided)
Specific P. Type
Specific Paper Type:
Match Print Direction
Fast Mode
*
Machine Default:
P. Type (2sided)
Specific P. Type
Orig. Direction
Orig. Direction:
Rear
*
Left top
ADVANCED OPERATION GUIDE
: Fast Mode
: Fast Mode
: Rear