Kyocera KM-1650 Advanced Operation Manual page 123

ADVANCED OPERATION GUIDE
Scanner Transmission Limit
Use to permit or prohibit scanning if the optional Network Scanner kit is
installed. If scanning is permitted, the total number of scanning
transmissions can be limited or set to No Limit.
NOTE:
This item displays if Scanner Job Accounting is set to On, refer to
Scanner Job Accounting, on page 4-13.
1 Display the Limit in use screen, refer to Registering a New Account, on
page 4-4.
2
Press or
TX and press [Enter].
3 Press or
Counter limit or Is not permitted
and press [Enter].
- No limit — Does not set
the limit of count of scanner transmission.
- Counter limit — Set the limit of count of scanner transmission (0 to
999,999).
- Is not permitted — Prohibits use of scanner transmission.
If Counter limit is selected, the Counter limit Default Value screen displays.
Use the numeric keys to enter the
counter limit, up to 999,999 can
be entered in 1 sheet increments.
Press [Enter]
.
The Limit in use screen displays.
to select Scanner
Limit in use:
to select No limit,
Scanner Transmitting:
Counter Limit Default Value:
Job Accounting
Printer :
Output Limit :
Scanner TX :
No Limit
*
Counter Limit
Is not permitted
999.999
Limitation
Able use
Able use
No limit
4-7