Excess Limit Setting - Kyocera KM-1650 Advanced Operation Manual

Job Accounting

Excess Limit Setting

4-14
2 Press or to select Job
Accountg Def. Set and press
[Enter].
3
Press or to select Fax Job
Accountng and press [Enter].
4
Press or to select Off or On
and press [Enter].
5 On completion, press
select End and press [Enter].
Use to select which action the machine takes when the limit set has been
exceeded. You can select to prohibit use of the machine immediately,
prohibit use after the current job has completed, or to display a warning
message.
1
Display the Job Accounting screen, refer to Access the Job Accounting
Screen, on page 4-3.
2
Press or to select Job
Accountg Def. Set and press
[Enter].
3
Press or to select Excess
limit Set and press [Enter].
4
Press or to select Stop job
immediately, Stop after job done
or Only warning and press
[Enter].
5 On completion, press
select End and press [Enter].
Job Accounting:
Each Job Accounting TL
Edit Job Accounting
Job Accountg Def. Set.
Job Accounting Default Setting:
Prnt Job Account.
Scanner Job Accnt
Fax Job Accountng
Fax Job Accounting:
Off
On
*
or to
Job Accounting Default Setting:
End
Copy Job Account.: On
Prnt Job Account.
Job Accounting:
Each Job Accounting TL
Edit Job Accounting
Job Accountg Def. Set.
Job Accounting Default Setting:
Scanner Job Accnt
Fax Job Accountng
Excess limit Set.
Excess limit Setting:
Stop job immediately
*
Stop after job done
Only warning
or to
Job Accounting Default Setting:
End
Copy Job Account.: On
Prnt Job Account.
ADVANCED OPERATION GUIDE
[ On ]
: On
: On
: On
: On
[ On ]
: On
: On
: Prohibit
: On