Table of Contents
Advertisement
Troubleshooting and Problem Solving
This appendix presents explanations of the FX-286's advanced fea-
tures and solutions for possible problems. If you have trouble or want
to know more about some of the FX-286 features, consult the appro-
priate section in this appendix.
Troubleshooting
This section gives solutions to a few possible problems.
Double-spacing or overprinting
If your FX-286 double-spaces when you expect it to single-space, or
if it prints all the lines on top of each other, change DIP switch 2-4. See
Appendix A.
Paper loading
If you have trouble while loading paper, check these four items:
1. Move the print head to the middle of the platen. (Be sure that the
printer is OFF when you do this.)
2. See that the pin-feed holders are set for the correct width.
are not sure, try moving them slightly farther apart.
3. See that no bits of paper are caught in the pin-feed holders.
4. Make sure the paper release lever is open (pulled toward the front
of the printer).
Appendix C
If you
C-1
Advertisement
Table of Contents
