Table of Contents
Advertisement
Setting up your new FX-286 is easy. Follow the steps in this chapter
to ensure that your FX-286 is properly unpacked, located, and ready
for operation.
Unpacking Your Printer
Be careful when unpacking your printer to make sure that you
don't lose any necessary pieces.
First, remove the printer from the box and take off all outside plastic
coverings and foam packing supports. Check that you've received all
the parts shown in Figure 1-1.
Chapter 1
Setting Up the
Figure 1-1. Printer parts
FX-286
1-1
Advertisement
Table of Contents
