Table of Contents
Advertisement
Loading Single-sheet Paper
Loading single-sheet paper in the FX-286 is just like loading paper in
a typewriter.
Remove the dust cover by tilting it up and lifting it off the printer.
1.
2. Now fit the front lid (pictured in B-2) onto the printer.
3. Make sure the paper release lever is pushed back in the direction of
the arrow.
4. Line up the left edge of the paper with the alignment arrow marked
on the metal plate as shown in Figure B-2. With the power OFF, use
the paper feed knob to roll the paper into the printer. (If the power
is ON, use the LINE FEED button.)
Alignment
Figure B-2. Loading single-sheet
5. If you plan on extensive single-sheet printing, you can also install
the protective center cover by clipping it into the slots shown in
Figure B-2.
B-2
arrow
paper
Advertisement
Table of Contents
