Using The Timer - Sony KDP-57XBR2 Operating Instructions Manual

Using the Projection TV Features
Using the Timer
You can use the Timer to program the projection TV to turn on and off
and tune to a specific channel at two scheduled viewing times.
The first time you turned on the projection TV, a setup screen
prompted you to set the clock (see "Setting Up the Projection TV
Automatically" on page 35). If you didn't set the clock during this
initial setup, you need to set it before you can use the Timer (see
page 50).
Setting the Timer
[]You can also accessthe
Timer through the Setup menu.
Fordetails, see page 66.
1
Press TIMER.
The Set Clock/Timers screen appears, with the current timer
settings shown.
2
To set the Timer, move the joystick t or • to highlight Timer 1 or
Timer2, then press C).
The clock must be set before you can set either of the Timers.If the clock
is not set, Timer I and Timer 2 cannot be selected.To set the clock, see
"Setting the Clock" on page 50.
3
Move the joystick • or • to highlight one of the following
options, then press (_).
Set Select to set or change the timer settings for the selected
_mer (Timer 1 or Timer 2).
On Select to turn on the timer settings for the selected TLrner
(Timer 1 or Timer 2).
Off Select to turn off the timer settings for the selected TLrner
(Timer 1 or Timer2).
4 If you selected Set in step 3, the setup screen for the selected Timer
(Timer 1 or Timer 2) appears.
49