Using The Timer Menu - Sony KP-43T90 Operating Instructions Manual

@ Using the Timer Menu
Daylight Savangs. On
Current Time
After setting the clock you can use the timer
to turn the projection TV on and off.
For detailed information on using the remote
Lontrol to modify menu settings, refer to
"Learning Menu Selection" on page 25.
To select the Timer 0 menu:
Set duylight saving time before setting the clock. Any
loss ofpowev will cause these settings to be erased.
2 Press + or + until the current hour (1-12) and
AM/PM is displayed, and press 0.
ent minute (00-59) is
displayed, and press 0.
you want the projection
TV to remain on is displayed,
and then press 0.
3 Press + or + to set the time duration (maximum of 6 hours) and press 0.
4 Press 4 or + to select the desired channel and press <-c).
The timer is now set. The TIMER/STAND BY indicator on your projection TV