Sony KDP-57XBR2 Operating Instructions Manual page 73

Using the Projection TV Menus
[] Fordetails about power
consumption in standby
modes, see page 78.
U You can also accessthe Timer
using the TIMERbutton on the
remote control.
Option Description
i.LINK Standby On Allows the i.LINK signal to pass through to
connected i.LINK devices even when the
Allows you to projection TV is turned off. Front panel LED
manage standby is orange. The projection TV uses more
power standby power than when this option is set
consumption to Off.
Off Does not allow the i.LINK signal to pass
through to connected i.LINK devices when
the projection TV is turned off. Front panel
LED is red. The projection TV uses less
standby power than when this option is set
to On.
Set €10ck/Timeis _iect to set the clock and to program your DTV to turn on
and off at two scheduled viewing times. For details, see
page 49.
Demo Runs a demonstration of the features of the DTV.
Factory Reset Restores all menu options to their original factory settings.
WARNING: Factory Reset clears all settings from
memory, including channel lists, favorite channels, menu
settings, timers, clock, etc.
66