Receiver; Connecting A Satellite Receiver - Sony KDP-57XBR2 Operating Instructions Manual

Setting Up the Projection TV
Connecting a Satellite Receiver
| Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2 Using an A/V cable, connect the satellite receiver's Audio and
Video OUT jacks to the projection TV's Audio and Video IN
jacks.
3 Connect a coaxial cable from your cable or antenna to the
projection TV's CABLE jack.
If the receiver you are connecting hasan S VIDEOjack, you can use an S VIDEO
cable for improved picture quality (compared to a combination audio/video
cable). BecauseSVLDEOcables carry only the video signal, you will also need
audio cables for sound.
AUDIO-R(red)
AUDIO-L(white)
VIDEO(yellow)
W
VHF/UHF@ CABLE
VIDEO IN
H D/DVD IN
AN cable
Coaxial
cable
Satellite receiver
VHF_UHF SJ, T EL_LJTe,_I
1
OUT_ AUBO g AUOm L WOEO _'_
,. u.=o=l@ @@ Satelli
I _ / antenna
I I I cable
23