Two Vcrs For Tape Editing; Connecting Two Vcrs For Tape Editing - Sony KDP-57XBR2 Operating Instructions Manual

Setting Up the Projection TV
Connecting Two VCRs for Tape Editing
The SELECT OUT jacks allow you use a second VCR to record a
program being played by the primary VCR to edit and dub tapes.
1 Using an A/V cable, connect the playback VCR's Audio and
Video OUT jacks to the projection TV's Audio and Video IN
jacks.
2 Using an A/V cable, connect the recording VCR's Audio and
Video IN jacks to the projection TV's SELECT OUT jacks.
TV
VHF/UHF
O
VIDEO IN
VCR(playback)
IN
UNE
AUDIO-R (red) -- 7
AUDIO-L (white)---_
VIDEO (yellow)_
AN cable
CABLE
@
IZ iNl,°o,o
A/V cable
-_2VCR (recording)
LINE
IN
AUOIOR AU_40L VIOEO
3 If necessary, change the video input on your VCR. (For details,
see your VCR's instruction guide.)
To do tape editing
El Press WNIDEO on the remote control to select the playback VCR.
You can selectthe output signal from the SELECT OUTjacks in the Setupmenu.
Fordetails, see page 65.
22