Sony KDP-57XBR2 Operating Instructions Manual page 82

Other Information
Problem
Dotted lines
or stripes
Possible Remedies
Adjust the ante_al
Move the projection TV away from noise sources such as cars, neon
signs, or hair-dryers.
Projection TV is fiXed to Si Use Auto Program inthe channel setup menu to
add
receivable
one channel channels that are not presently in memory (see page 58).
Check your Channel Fix settings (see page 58).
Double images or ghosts _ Use a highly directional outdoor antenna or a cable (if the problem
is caused by reflections from nearby mountains or tall buildings).
Ca_0t select menu item _ if the item you want to ch0ose appears in gray, it is not available to
be selected.
Cannot receive any _ Use Auto Program in the Channel Setup menu to add receivable
channels when using channels that are not presently in memory (see page 58).
cable TV _ Check your cable settings.
Cannot gain enough _ Increase the volume of the cable box using the cable box's remote
volume when using a control. Then press TV (FUNCTION) and adjust the projection TV's
cable box volume.
Cannot receive channels _ Check antenna connections.
Adjust antenna. If you cannot receive DTV channels, see "Digital
Signal Strength" on page 59.
Use Auto Program in the Channel Setup menu to add receivable TV
channels that are not presently in memory (see page 58).
Unable to select a channel _ Use Auto Program in the Channel Setup menu to add receivable TV
channels that are not presently in memory (see page 58).
Lost password _t In the password screen (see page 60), enter the following master
password: 4357. The master password clears your previous
password; it cannot be used to temporarily unblock channels.
Cannot change channels _ Be sure you have not inadvertently switched your projection TV
with the remote control from channel 3 or 4 setting if you are using another device to
change channels.
If you are using another device to control channels, be sure the
"function" button for that device has been pressed. For example, if
you are using your satellite receiver to control channels, be sure to
press the SAT/CABLEbutton.
C_ot-cycle-_ougi_ _ Sure title Vide0_input feature has not been set t0skip (see page 65)
other video equipment
connected to the
projection TV
75