Connecting A Satellite Receiver With A Vcr - Sony KDP-57XBR2 Operating Instructions Manual

Setting Up the Projection TV
Connecting a Satellite Receiver with a VCR
1
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2 Connect the CATV cable to the VCR's VHF/UHF IN jack.
3 Using a coaxial cable, connect the VCR's OUT jack to the
projection TV's CABLE jack.
4 Using an A/V cable, connect the satellite receiver's Audio and
Video OUT jacks to the VCR's Audio and Video IN jacks.
5 Using an A/V cable, connect the VCR's Audio and Video OUT
jacks to the projection TV's Audio and Video IN jacks.
6 If necessary, change the video input on your VCR. (For details,
see your VCR's instruction guide.)
VHF/UHF@
VIDEO IN
AUDIO-R (red}
AUDIO-L (white)
VIDEO (yellow)
Coaxial
cable
AN cable
CAW Satellite
cable antenna
cable
1
Satellite receiver SATEL_ =_
I:HFtUHF S VIDEO /_11_0 R AU_ L VIDEO []
!@®®® I=oo°
)I"
3
Z:_ If the peripherals you are connecting have SVIDEOjacks, you can useS VIDEO
cables for improved picture quality (compared to combination audiolvideo
cables).BecauseSVIDEOcables carry only the video signal, you will also need
audio cables for sound.
24