Table of Contents
Advertisement
inserting Batteries into the Remote Control
Before you can use the remote control, you must first insert the
supplied
batteries.
If you want to use this remote control to operate
your TV, cable box, VCR, or laser-disc player, you must also program
the remote, as described
in the Appendix
on page 79.
To install the batteries:
1
Push and slide open the battery
compartment.
2
Insert two size AA batteries
(supplied).
Be sure to line up the ÷ and
- on the batteries
with the ÷ and - on the battery compartment.
Notes on Batteries
El
If the remote control does not operate
properly, the batteries
might
be worn out. When replacing
batteries,
replace both of them with
new ones, and do not mix different types of batteries
together.
When you remove the batteries
-- to replace them, for example
--
any codes you've set may be erased. If this happens,
you must
reprogram
the remote. See "Programming
the Remote" on page 79
for details.
(.hap_el
1: introducing
the DSS System
7
Advertisement
Table of Contents
