Table of Contents
Advertisement
3
Select one of the following:
To Do This ...
Do This ...
Change
the data service for the
Select the data service and then
current station only
select OK.
Change
the data service for all
Select DEFAULT (then see
stations
"Changing
the Default Data
Service"
below).
Change
the baud rate for the DSS
Select BAUD (then see "Setting
receiver's
wide band data port
the Baud Rate" below).
Changing the Default
Data Service
Selecting CANCEL returJ_ you to the
previous screen, withou t saving your
selections.
The titles of the data services may be
different, based on the service being
provided.
Use the Default Data Services screen to select a default data service for
all stations
that provide
data services.
To change the data service for all stations:
1
Select DEFAULT from the Data Services screen.
2
Select a default data service and then select OK.
DEFAULT DATA SERVICES
DATA 1
DATA 2
DATA 3
DATA 4
_"
_CANcEL
-
DATA 5
DATA 6
DATA 7
DATA 8
[
HELP
Setting the Baud Rate
Selecting CANCEL returns you to the
previous screen, without saving your
selections.
The baud rates displayed may be
different, depending on which data port is
being used.
To set the baud rate for the DSS receiver's data ports:
1
Select BAUD from the Data Services screen.
2
Select a baud rate for the data port and then select OK.
SET BAUD RATE
2400
4800
] 9600
19200
62
Chapter 5: Using the Custom Setup Menu
Advertisement
Table of Contents
