Getting Started; Connecting Your Tv And Vcr; Connecting A Hi-Fi Etc; Inserting Batteries Into The Remote Control - Sony VTX-D800U Operating Manual

Text.fm Page 7 Tuesday, April 27, 2004 8:21 AM

Connecting your TV and VCR

Note: Before connecting your TV and VCR, ensure all equipment is disconnected from the mains supply.
VTX-D800
VTX-D800
Loop through
cable

Connecting a Hi-Fi etc.

Connect your Hi-Fi to the audio output socket of the
receiver as shown.
Note: Depending on your Hi-Fi equipment, you can use
either a conventional 3.5mm jack plug lead or an
optical lead (mini TOS) when connecting your Hi-Fi
to the receiver.
Do not connect your headphones to this socket.

Inserting batteries into the remote control

1
Push and lift up the release clip to
remove the battery cover.
*To TV scart
To TV aerial
socket
socket
*To VCR scart
socket
* When connecting SMARTLINK equipment,
please refer to page 19.
** If you do not have a VCR, connect the loop
through cable directly to your TV aerial socket.
2
Insert the supplied batteries as
indicated inside
compartment.

Getting started

Getting started
To RF OUT
socket
**To RF IN
socket
the battery
7