Sony DSS SAT-A1 Operating Instructions Manual page 57

Locking Your System To lock an unlocked systenl:
1
Select LOCK from the Set Lock_ and Limits _cl__.c.J_.
SET LOCKSAND LIMITS
_,I_
I SPENDING LIMIT I $10.00
I RATINGS LIMIT PG
I STATION L OCK 4 Stations L ocked
I IPay Per View Un,ocked
5e/ectmg L.ANCLL rcluJ H_y_l_ to lJlc
previous screen, without saving your
selections.
2
The Set Passcode screen appears. Enter a four-digit passcode
number. Use the 0-9 buttons or move the joystick up and down to
enter the numerical value. (If you use the joystick to enter the
value, move the joystick left or right to move to the previous or
next position.)
Each number you enter appears as an asterisk (_), which keeps
your passcode secret.
SET PASSCODE
Note
DON'T FORGET YOUR PASSCODE. You'll need this number to unlock
your system or to make any changes to the locks and limits you've set. If you
do forget your passcode, call your program provider for assistance.
3 When prompted, enter your passcode again. (This confirms your
selection of a passcode number.)
4 Select OK to return to the Set Locks and Limits screen.
Your system is now locked, as indicated by the closed padlock (_) in
the Set Locks and Limits screen. All locks and limits you've set are now
in effect. The padlock also appears in the Program Banner to remind
you of the locked status.
Chapter 5: Using the Custom Setup Menu 57