Running A System Test - Sony DSS SAT-A1 Operating Instructions Manual

Running a System lest
1he System lest lets you check the inteb_ty oI you_ >_tcm s
components, including:
_.1 Antenna signal
1i System tuning
[_1 Phone line
_1 Access card
Use the System Test if you are experiencing problems with youL
system.
To run the System Test:
1
Select RUN SYSTEM TEST from the Installation Menu.
2 Select TEST.
RUN SYSTEM TEST
SIGNAL
TUNING
PHONE
CARD
I
I
I
The System Test checks all the components automatically, and
displays the result of each test.
3 Select RETURN to return to the Installation Menu.
It Ihe System Test Reports
Any Problems...
Check your system for any of the following:
Li
LI
LJ
The access card test will fail if you have not yet called your
program providers to establish service. After your service has been
established, the access card test should pass.
Check that all cables are connected properly to the DSS receiver.
Check that the satellite antenna is installed correctly, and that the
signal has been optimized. See the manual that came with the
satellite antenna for details.
_J Check that the phone line connected to the DSS receiver is working
properly.
Check that the access card is inserted properly.
If you cannot resolve problems reported by the System Test, see
"Customer Support" on page 2.
72 Chapter 6: Using the Installation Menu