Table of Contents
Advertisement
When
the VCR
receives
the signals
using
the
audio/video input jacks on the rear panel of the VCR
from your satellite tuner, the ¥CR will turn itself on, and
record. Then when there is no signals, the VCR stops
and tarns itself off automatically.
If your satellite tuner
has the EPG (Electronic Program Guide), you can set a
timer program using it. For details, please see your sat-
ellite tuner's owner's manual. Also, you need to follow
the steps below for the VCR.
• Connect the audio/video
input jacks on the rear
panel of the VCR to the audio/video output jacks on
the satellite tuner.
• Press the TAPE SPEED button on the VCR to select
the desired tape speed (SP/SLP).
• Clock must be set to the correct time and date before
setting the timer.
Note for viewing/recording
a program using your
satellite tuner:
• Ifa broadcasting program has copy guard protection,
you may not record clearly.
• When you record a program using the Auto Satellite
Link feature, the beginning(a few seconds) of a pro-
gram may be not recorded.
"] Insert a cassette tape with its erase prevenfion
tab in place
If necessary, rewind or fast forward the tape to the point
at which you want to begin recording.
2 Set the program to be recorded on the satellite ;
tuner
Please see your satellite tuner's owner's
manual.
3 Seleetmain
menu
Press the MENU button until the
main menu appears.
Select "AUTO SATELLITE LINK"
4
i Press the PLAY/&
or STOP/Y
(" ..............
)
button to point to "AUTO SAT- [
.,s
(ELLITE LINK". Then, press the
"s;€'
"
! F.FWDtl_ button.
The current
i time appears on the TV screen.
(
• If you set the VCR to the stand-by mode of Auto
I
Satellite Link, immediately
press the F.FWD/I_ but-
ton again, then go to step [7].
• If you view the satellite tuner's program until the start
time for an Auto Satellite Link, continue with step [5].
Q If you ha'4e not yet set the clock, "CLOCK SET" ap-
pears. If so, follow the steps [2] to [8] on page 15.
,
Then, set the timer recording.
5
Set the start hour
, Press the PLAY/A
or STOP/V
button
until the desired
hour
(AM or PM) appears.
(Example : 01, PM)
Then, press the EFWD/I_
button.
I
Au*o_rBXlTI t_K
Press the PLAY/A or STOP/V
"*"
S1%
button until the desired
minute
i appears. (Example : 30)
NOTE:
Press the REW(IND)/,II
button to go back one
step from the current step.
7 Finish setting the program
Pressthe EFWD/I_
button.
: After a few seconds, the VCR turns off and the TIMER
indicator on the VCR will come on.
• To exit a stand-by mode of the Auto Satellite Link,
press the POWER button to turn on the VCR. In this
case, the Auto Satellite Link setting will be cancelled
automatically.
• When stopping a recording of the Auto Satellite Link
I
while in progress, press the STOP/EJECT
button on
the VCR. In this case, the Auto Satellite Link setting
will be cancelled
automatically.
• There is a chance that a recording will not be performed
correctly when another timer recording overlaps. Iftbe
start time for an Auto Satellite Link comes up during a
timer recording, the timer recording has priority.
J
- 29 -
EN
9J27
H59M5
Advertisement
Table of Contents
