Hints For Timer Recording - Sylvania SRV206 Owner's Manual

• When y oupress the F.FWD/II,- button d uring s teps
[4] to [10], you may move to the next step.
• Press the REW(IND)/'ql button to go back one step
from the current step during steps [2] to [10].
4 Set the date when you want to start
First, press the PLAY/& or
STOP/V button until the desired _ T,,,_,,,o¢_,
pRCG_ NO_ _
month appears. _ =,,°,-_u
(Example: "05" for May) _'d_,o ::
Then, press the EFWD/_ button.
Next, press the PLAY/&. or
STOP/V button until the desired day appears, and then
press the EFWD/I_ button. (Example: "04" for 4th)
5 Setthe start hour
I ! .......
Press the PLAY/& or STOP/Y ,._,x._,,,,,o,,,E, ,
t_rE %dlht_ 4 rv_
button until the desired hour ap- _A_,E_"= _"_r*'-.. --
pears. (Example: 07) .E ........
Then, press the EFWD/_ button.
6 Set the start minute
Press the PLAY/& or STOP/V
button until the desired minute
appears. (Example: 30)
Then, press the EFWD/I_ button.
o,w_ _to4 ,1=41@
srA_r XlUE ot:ao_
_o xluE ---- _e.|%
At_ _pseo -- A,i
Next, press the PLAY/& or STOP/V button to point to
"AM" or "PM". (Example: PM) Then, press the
EFWD/II,,- button.
7 Set the end hour
Press the PLAY/& or STOP/V
button until the desired hour ap-
pears. (Example: 08)
Then, press the EFWDt_- button.
STARt_ ,Pa _ _,_
..... ,_.- _j
CHt-_EL _ %
R_C _E_a
Press the PLAY/& or STOP/V ;_"_'_,'_A*_YL '_
button until the desired minute
"° '_ °':_''
appears. (Example: 30) Then, "°°_'- ,._
press the EFWD/I_ button.
Next, press the PLAY/A. or STOP/_ button to point to
"AM" or "PM". (Example: PM) Then, press the
EFWD/I_ button.
9 Set the channel number
Press the PLAY/A or STOP/V
button until the desired channel
number appears. (Example: 16)
Then, press the EFWD,,I_" button.
p_o_u _OUBE_
t_T_ 0_1o4 Imu
sr,_nT r_E 0 r _ o
C_N_L _ I _
• Remember refer to "ANTENNA/CABLE CON-
NECTIONS" on pages 11 and 12 if you have a cable
box orsatellitebox beforesetting the channelnumber.
10
Set the tape speed .... _.*,
button until the desired tape "°"_=,,t_"
Press the PLAY/& or STOP/V speed appears. (Example: SP)
11 Finish setting the program
Press the F.FWD/I_ button. Program I is now com-
pleted.
• To set another program, repeat steps [2] to [I I].
• Press the RESET/EXIT button to return to original
mode.
12
Set the timer
Press the POWER button to turn off. The TIMER indi-
cator on the VCR comes on.
• Please see "HINTS FOR TIMER RECORDING" on
page 27 for more information.
• If there is a power failure or the VCR is unplugged
for more than 30 seconds, the clock setting and all
timer settings will be lost.
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape
and the VCR power will be turned off. The TIMER
indicator will flash.
• If a tape is not in the VCR or does not have the erase-
protection tab, the TIMER indicator flashes and
timer recording cannot be performed. Please insert a
recordable tape.
• The TV that is connected to your VCR may be turned
ON or OFF when the VCR is in the timer-record
mode.
- 27 -
EN
9J27
H59M5