Table of Contents
Advertisement
The channels
you nolonger receive orseldom w atch can
bedeleted from the memory. (Ofcourse, you can later
add the deleted channel intothe memory again.)
• Be sure to check that the POWER and the VCR/TV
indicators are both on.
• TurnontheTVandsettheTVtochannel
_
3 or 4. Now set the CH3/CH4 switch on
the back oftbe VCR to match the channel
[Back of
selected on the TV.
theVCR]
.uEtlu
i.
1 Select main menu
.._.,.o_.,_._
AUTOCRAT
[¢_3
Press the MENU button until the
,. c,,,_=L_v,_"_=_e"
ct_K
s_
main menu appears.
_"_'_'_-_
AtlTO _V,rLtrr [ t n,t
2
Select "CHANNEL
SET
UP"
Press the PLAY/& or STOP/V button to point to "CHAN-
NEL SET UP". Then, press the EFWD4_. button.
Select"MANUAL
SET UP"
Press the PLAY/& or STOP/V but-
ton to point to "MANUAL SET UP".
Then, press the F.FWD/)p- button.
Auto _,_7 up
_mJ_.
srr up
! NOTE:
To confirm that channel(s) has been deleted or
added, press the CHANNEL
• or • button.
Remember:
If your cable box or satellite box is con-
nected as in Fig 4 on page I I or Fig 5 on
page 12, you DO NOT have to set up the
channels. Just select the TV and VCR to
channel
3 or 4 and also
have
the
CH3/CH4 switch on the back of the VCR
to match the channel you selected (CH 3
or CH 4). Now select the Box to the chan-
nel you wish to view or record.
I ) Press the MENU button until the main menu appears.
2) Press the PLAY/•
or STOP/V
button to point to
"CHANNEL SET UP". Then, press the F.FWDtI_. but-
ton,
3) Confirm "AUTO SET UP" is
pointed
to, then
press
the
F.FWD/I_- button. After scan-
ning, the tuner stops at the low-
est memorized channel.
I
C_AN_L S[/Vp
_. *U_
s_r up
• The VCR distinguishes
between standard TV chan-
nels and cable channels.
4
Enter the desired
channel
number
Press the number buttons or the
PLAY/•
or STOP/•
button until
your desired channel number ap-
pears. (Example: CH30)
• i=_*
5
Delete it from memory
Press the F.FWD/IP" or REW(IND)/.91
button so that
"DELETE" flashes on the TV screen.
• To delete another channel, repeat steps [4] and [5].
• If you press the F.FWD4_" or REW(IND)/_I
button
again, the channel is memorized again.
- DELETED
-
- MEMORIZED
-
Exit the preset tootle
Press the RESET/EXIT
button to return to TV mode.
If you want to change the language on the TV screen,
follow the steps below:
Note: This function effects only the language on the
screen menu and not the audio source.
i)
2)
3)
Press the MENU button until the main menu appears.
Press the PLAY/&
or STOP/•
button to point to
"LANGUAGE
SELECT".
Then,
press
the
F.FWD/!_
button.
Select
"ENGLISH"
or
,._,,_
,o_,
"ESPAlC, I OL"= Spanish using
_"_
the PLAY/A or STOP/V
but-
ton.
4) Press the RESET/EXIT
but-
ton to return to TV mode.
NOTE: If for some reasonthe menu is in Spanish, press
the MENU button until the main menu appears, press the
PLAY/& button to point to "SELEC. IDIOMA", press the
EFWD/I_
button, press the PLAY/•
button to point to
"ENGLISH", then press the RESET/EXIT button.
_16-
EN
9J27
H59M5
Advertisement
Table of Contents
