Special Playback; Auto Repeat Playback; Picture Select - Sylvania SRV206 Owner's Manual

Video cassette recorder
Hide thumbs Also See for SRV206:
Table of Contents

Advertisement

SPECIAL PLAYBACK
• Be sure to check that the POWER and the VCR/TV
indicators are both on.
The VCR has the auto repeat function that allows you
• Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on
the back of the VCR to match the channel
[Back ot
selected on the TV.
t_eVCR]
to repeat a tape indefinitely without touching the PLAY
button.
Make sure to insert a prerecorded tape.
"_ Select main menu
Press the MENU button until the
_R,,,,,:_,_,,,,_
pleru_
SELeCt
main menu appears.
_._"'_°'
2
Select"AUTO
REPEAT"
Press the PLAY/&
or STOP/V
button to point to "AUTO REPEAT".
3
Begin Auto repeat playback
Pressthe F.FWD/I_ button sothat [ON] will appear next
to "AUTO REPEAT" on the TV screen.
When in Stop mode, Repeat playback mode will start
automatically.
If the on-screen
menu still remains,
press the RE-
SET/EXIT button to exit the menu.
• Once you select the Auto Repeat mode, it stays in
effect even after you turn off the VCR.
• The COUNTER MEMORY button does not function
if the Auto Repeat mode is set to [ON]. In this case,
set the Auto Repeat mode to [OFF].
• To stop playback, press the STOP button.
This function enables you to select the picture quality of
a tape.
• This selection must be done during
playback.
1
Insert a tape into VCR
Begin playback.
i
ect main
menu
r,._p_,x._M.;,_
_.
F_eTURE SB.EgT
Pressthe MENU button unt,ltbe
_'°":j"
'="
_ main
menu
appears
,_,_E_=.
3 SeIect"PIOTURESELECT"
[
_Z_:,
J
Press the PLAY/& or STOP/V button to point to "PIC-
TURE SELECT".
4 Select your desired mode
Press the EFWD/_
button until your desired mode
(NORMAL,
SOFT or SHARP) appears no the TV
screen,
! • Once you select the Picture Select mode, it stays in
effect even after you turn off the VCR.
i • To stop playback, press the STOP button.
Power failure: If there is a power failure for more than
30 seconds, Picture Select will go to
NORMAL.
TO EXIT Till? AUTO
REPEAT
MO1)E
Repeat steps [l ] to [2], and press the F.FWD/I_ button.
[OFF] will then appear on the menu. Then, press the
RESET/EXIT
button to return to TV mode.
Power failure:
If there is a power failure for more than
30 seconds, Auto Repeat Playback will
go to off.
-21 -
EN
9127
H59M5

Advertisement

Table of Contents
loading

Table of Contents