Table of Contents
Advertisement
When
the VCR
receives
the signals
using
the
audio/video input jacks on the rear panel of the VCR
from your satellite tuner, the VCR will turn itself on, and
record. Then when there is no signals, the VCR stops
and turns itself off automatically.
If your satellite tuner
has the EPG (Electronic Program Guide), you can set a
timer program using it. For details, please see your sat-
ellite tuner's owner's manual. Also, you need to follow
the steps below for the VCR.
=, Connect
the audio/video
input jacks on the rear
panel of the VCR to the audio/video output jacks on
the satellite tuner.
• Press the TAPE SPEED button on the VCR to select
the desired tape speed (SP/SLP).
Clock must be set to the correct time and date before
setting the timer.
Note for viewing/recording a program using your
satellite tuner:
• If a broadcasting program has copy guard protection,
you may not record clearly.
• When you record a program using the Auto Satellite
Link feature, the beginning(a
few seconds) of a pro-
gram may be not recorded.
1
Insert a cassette tape with its erase prevention
tab in place
If necessary, rewind or fast forward the tape to the point
at which you want to begin recording.
2
Set the program to be recorded on the satellite
tuner
Pleasesee your satellite tuner's owner's manual.
3
Select main menu
-MENU.
Press the MENU button until the
" "_'_'_
Atmo REpot
pOFFI
main menu appears,
o__,_°"_t"_°'
t_k'Go_E
SI_LEX_r
,*oro t._,o_um
L_
4
Select"AUTO SATELLITE LINK"
Press the PLAY/& or STOP/_'
button to point to "AUTO SAT-
ELLITE LINK". Then, press the
EFWD/II,,- button.
The current
time appears on the TV screen.
,*two _,Ar_u.rr_ LIt_K
]
- 27
• If you set the VCR to the stand-by mode of Auto
Satellite Link, immediately press the F.FWD/IP- but-
ton again, then go to step [7].
• If you view the satellite tuner's program until the start
time for an Auto Satellite Link, continue with step [5].
• If you have not yet set the clock, "CLOCK SET" ap-
pears. If so, follow the steps [2] to [8] on page 15.
Then, set the timer recording.
5 Set the start hour
Press the PLAY/&
or STOP/Y
button
until the desired
hour
(AM or PM) appears.
(Example : 01, PM)
Then, press the EFWD/II_ button.
6 Setthestartminute
(
,_=,,_._=**
,_|,p
Press the PLAY/& or STOP/V"
.2,;,.,.
button until the desired minute
appears. (Example : 30)
NOTE:
Press the REW(IND)/._I button to go back one
step from the current step.
7
Finish setting the program
Pressthe EFWD/I_
button.
After a few seconds, the VCR turns off and the TIMER
indicator on the VCR will come on.
To exit a stand-by mode of the Auto Satellite Link,
press the POWER button to turn on the VCR. In this
ease, the Auto Satellite Link setting will be cancelled
automatically.
When stopping a recording of the Auto Satellite Link
while in progress, press the STOP/EJECT
button on
the VCR. In this case, the Auto Satellite Link setting
will be cancelled
automatically.
• Thereisachancethatamcordingwillnotbeperformed
i
correctly when another timer recording overlaps. If the
start time for an Auto Satellite Link comes up during a
timer recording, the timer recording has priority.
EN
9J27
H58M0
Advertisement
Table of Contents
