S Bottom Margin; S Perforation Skip; S Paper Source - Epson C I - 4 0 4 User Manual

Configuring the printer
S The bottom margin indicates the last print line. Going beyond this margin
automatically initiates a form feed. The bottom margin is always set in steps
1
of / ".
6
The bottom margin can be set to a maximum of / ".
The above specifications are influenced by the settings in "Vertical Position"
(see section "V.POS" in this chapter).

S Perforation Skip

S
If PERF. SKIP is set to YES the printer starts to print after specified top
margin and stops printing before the bottom Margin.
S
If PERF. SKIP is set to NO the printer ignored the top and bottom margin
and prints from the very first line to the very last. That means that on a
standard 11" paper 66 lines are available for printing.

S Paper Source

The printer offers three input possibilities:
S
TRACTOR (fanfold paper)
S
Manual (for printer CI - 4040 optional)
S
ASF cassettes (optional only for printer CI - 4050), they can be
accessed either individually or pooled in a specified sequence. Any
combination or cassettes can be selected (for detail the chapter 7 ASF
Cassettes).
A corrective factor for the vertical positioning of the paper can be applied to
each paper source and the Run-In-Sensor (see section VERT.POS.ADJ.).
Please refer to chapter 8, Technical Data, for detailed media
Note:
specifications.
3-12
8
6