Table of Contents
Advertisement
1.8.1
Replacing the Ribbon Cassette
The print head may be very hot immediately after printing!
Caution:
-
Close the top cover and switch the printer ON. Lift the top cover after the
display shows the message READY 1 ELQ to gain access to the ribbon
cassette mountings. The print head will move to the correct position, aligned
with the cut-out in the paper guide plate to facilitate the installation of the
ribbon cassette.
-
Now swing the lower part of the ribbon to the back.
In this way the mounting pins loosen from the lower position.
-
Then press the upper part of the ribbon to the back. The upper mounting
pins get free and the ribbon can be taken out.
2.
To install a new ribbon cassette please see 1.8 Installing the Ribbon
Note:
Cassette (see pages before).
1.
Getting Started
1-13
Advertisement
Table of Contents
