1.7
Power ON/OFF Switch
The power ON/OFF switch (1) turns the printer's power supply ON or OFF.
When switched ON the printer performs an internal self-test which checks the
electronics, the print head carriage movement and the interface. Power ON is
indicated by a green LED on the operator panel and shows TEST.... .
If the message INSTALL RIBBON is shown, follow the steps in paragraph 1.8
Installing the Ribbon Cassette.
After inserting the ribbon press
completed successfully the display shows READY 1 ELQ or BUSY 1 ELQ in
case data has already been transmitted.
If the display shows anything different please refer to chapter 5
Note:
Troubleshooting and Diagnostics.
to continue. When the internal test has been
Getting Started
1-9