Examining The Bi-D Black (K1) Alignment Pattern - Epson 9600 Printer Manual

Note
You must use at least a
×
10 eye loupe to check
the pattern.
Note
If number 5 is the
straightest line in each
group, the print head is
already properly aligned.
Press Pause to exit the
head alignment early.
3. Use your own eye loupe or the one that came with the printer to
determine which line is the straightest. In this example, the middle line
(numbered 5) is the best choice.
4. If number 5 is the straightest line, press
default setting). Otherwise, use the u or d button to select the number
of the straightest line, then press
5. Repeat this process to examine the remaining color groups in row #1: C,
M, Lc, Lm, and Y. In each case, select the number of the straightest line,
then press .
Enter
6. Repeat this process to examine the groups of lines in rows #2 and #3.
7. When done, press

Examining the BI-D BLACK (K1) Alignment Pattern

Follow these steps when the BI-D BLACK (K1) patterns finish printing:
1. Depending on the width of the paper loaded in the printer, more than
one set of patterns may be printed. Locate the patterns in the middle of
your printout. In the steps that follow, refer to those patterns to make
your adjustments, instead of the ones printed toward the left or right.
1-59
Setting Up the Printer
Look for the straightest line
Enter
.
Enter
to exit the head alignment.
Pause
to accept it (5 is the
Refer to middle set of patterns
when making adjustments
| 59