Epson 9600 Printer Manual page 92

92 | Printing with EPSON Drivers for Macintosh
Note
The No Margins setting
is not available for some
paper sizes.
Note
For more information on
using cutting options and
printing without borders,
visit www.epson.com.
Under Drivers & Support,
select Manuals &
Documents. Select your
printer, then select
Product Support
Bulletin.
To print without borders on one of the listed paper sizes, follow these steps:
1. Make sure your image size is at least 1/4 inch larger all around than the
size of paper you're printing on. If your application has margin settings,
be sure they're turned off.
2. Select
No Margins
3. On the printer's control panel, press the
Printer Setup menu appears on the display.
4. Press the
SelecType
press the d button until
5. Press the r button, then press the d button to select one of these paper
cutting options:
when printing without left and right margins only
• L/R ONLY
or
• 1CUT 2CUTS
( causes the images to be printed end-to-end. If you prefer
1CUT
additional space between your images, select
the space between the images and the paper is cut twice inside this
space.)
6. Press to activate the setting, then press
Enter
and return to normal printer operation.
Continue on to the next section to print your image.
3-92
in your printer software:
SelecType
r button again to open the menu options, then
is displayed.
No Margins
when printing without any margins
Select
No Margins
button until the
. This extends
2CUT
to exit setup mode
Pause