Using Cut Sheet Paper - Epson 9600 Printer Manual

Note
The maximum length of
roll paper you can print on
is not limited by the
printer, but may be
limited by your application
software or operating
system.
5. Press the d button until
6. Press the button to save this as the new setting. (An asterisk
Enter
appears next to
*ON.)
7. Press the button to exit the menu.
Pause

Using Cut Sheet Paper

You can print on many types of cut sheet paper and other media. The Stylus
Pro 9600 accepts sheets ranging from letter-size (8.5 × 11 inches) to
44 inches wide. The Stylus Pro 7600 accepts sheets up to 24 inches wide.
You can leave your roll paper in the printer when you print on cut sheets;
make sure it is rolled up and fastened with the roll paper belt, as described
on page 74.
If you're using stock greater than 19 mil (0.5 mm) thick, load it as described
on page 79.
Follow these steps to load cut sheets:
1. Make sure the printer is on and the roll paper cover is closed.
2. Press the
Paper Source
3. Push the paper lever back to the released position.
2-77
Handling Paper and Other Media
appears.
ON
button until the
Sheet
| 77
light comes on.