Epson 9600 Printer Manual page 86

86 | Handling Paper and Other Media
6. Examine the printed pattern for the most evenly overlapping lines. In
the example shown above, the lines under number 4 are the most even.
7. Use the u and d buttons to display the selected line number, then press
to save your new setting.
Enter
8. The menu options shown below appear in sequence. Make any
adjustments, as needed, and press
The following settings are available:
Menu option Function
CUT Decreases the cutting blade pressure for thinner papers.
PRESSURE Provides a cleaner cut.
CUT METHOD Lets you choose between a 3-step and 4-step cutting
method. For more exact cuts on thicker or thinner paper,
choose 4-step.
PPR FEED Lets you eliminate light or dark horizontal banding in your
ADJUSTMENT printouts. When set to 0, the EPSON driver adjusts the
paper feed automatically.
DRYING TIME Use when printing with non-EPSON media. You can make
the print head wait up to 5 seconds after each pass to allow
ink to dry on the page.
SUCTION Lets you decrease the paper suction level when printing on
thinner papers (less than 12 lb), such as CAD drafting paper
or backlight film.
PRINT ADJ Adjusts the intensity of the MicroWeave pattern. Improves
print quality but lowers printing speed.
9. When done, press the
Once you have created a paper profile, you can select it whenever you print
on that paper:
1. Press the
SelecType
appears on the display.
CONFIG
2. Press the r button until
3. Press the r button.
2-86
to save each setting.
Enter
button.
Pause
button, then press the d button until
PAPER NUMBER
PAPER
appears.