Epson 9600 Printer Manual page 149

Note
The display indicates
which cartridges will be
installed in the first and
second ink slots (Matte
Black, Light Black, or
Photo Black). You may
not need to replace both
cartridges, depending on
the mode you want to
switch to.
Caution
Do not turn off the printer
once the cartridges are
removed.
If a power failure occurs,
turn the printer back on.
You can resume the
procedure at the point
where it was interrupted.
Maintaining and Transporting the Printer
5. Press . You see
Enter
6. Press u or d to select the correct option for the ink mode you want to
switch to:
Ink mode
Matte Black Mode
Dual Matte Black Mode
Photo Black Mode
7. Press .
ENTER
If you see the message
remove any low or empty cartridges. (Check the
control panel to see which cartridges are low or empty.) Insert the
replacement cartridge(s), then lower the ink lever.
8. The printer displays a message telling you to release the ink lever and
remove the cartridges. Raise the lever and remove all the cartridges; do
not re-insert them until instructed to do so.
Be sure to set aside any black ink cartridges you won't be using, so that
you don't accidentally re-insert them.
5-149
.
SELECT INK SET
Option displayed on printer
#1 MAT: #2 LBK
#1 MAT: #2 MAT
#1 PBK: #2 LBK
NOT ENOUGH INK
, lift the ink lever and
lights on the
Ink Out
| 149