Basic Steps For Configuring Sampling Parameters; Configuring Parameters For Sampling With A Single Sensor - Casio E-Con EA-200 User Manual

For classpad 300; classpad 300 plus

Hide thumbs Also See for E-Con EA-200:

Table of Contents

2 Basic Steps for Configuring Sampling

Parameters

This chapter explains the basic operations you need to perform when configuring EA-200

sampling parameters from the E-Con EA-200 application. Before performing any of the

procedures in this chapter, be sure to connect the EA-200 to your ClassPad.

Use the [Single] tab of the Sensor Setup window to configure the parameters for a single

sensor.

• The procedure for configuring sampling settings on the [Single] tab is similar to a Windows

Setup Wizard. As you select a sensor and input setting values on the [Single] tab, settings

are adjusted automatically in order to make it possible to perform sampling properly. Even if

you are configuring settings for a single sensor, you should use the [Multiple] tab when you

want to configure all of the detailed settings yourself.

u To configure parameters for sampling with a single sensor

(1) Start up the E-Con EA-200 application.

• This displays the [Single] tab of the Sensor Setup

window.

• If the E-Con EA-200 application is already running

and another window (besides the Sensor Setup

window) is displayed, tap C to change to the Sensor

Setup window.

Basic Steps for Configuring Sampling Parameters

20031201

2-1

Table of Contents