Casio E-Con EA-200 User Manual page 16

Basic Steps for Configuring Sampling Parameters
u To configure a setup for Photogate and Smart Pulley
In step (3) of the procedure under "To configure parameters for sampling with a single
sensor" on page 2-1, select [Photogate (Pulley)] on the [Vernier] tab for the sensor. This
causes the parameters described below to appear on the Sensor Setup window that appears
in step (4).
Parameter
(Channel)
Distance
Store List Folder
Data
Time
Distance Distanc
Velocity Velocity
Accel
Tip
• The menu bar's [Setup] button is unavailable while [Photogate] or [Photogate (Pulley)] is
selected.
2-6
Initial Default
SONIC CH1:
SONIC: Select this option when the Photogate
1m Input a value in the range of 0.1 to 4 to specify the
distance in meters.
EConSamp Specify the variable folder for storage of time,
distance, velocity, and acceleration data.
Time Input a variable name up to eight characters long for
storage of time data.
Input a variable name up to eight characters long for
storage of distance data.
Input a variable name up to eight characters long for
storage of velocity data.
Accel Input a variable name up to eight characters long for
storage of acceleration data.
20031201
Description
Select this option when the Photogate
(Pulley) sensor is connected to CH1.
(Pulley) sensor is connected to SONIC.