Casio E-Con EA-200 User Manual page 49

u To view real-time sample data during sampling configured with the [Single]
tab
(1) On the Sensor Setup window, display the [Single] tab and configure the settings you
want.
• You can also recall previously saved setup data (page 4-2).
(2) Tap v.
• This displays the Multimeter window and starts sampling with the sensor connected
to the channel specified on the [Single] tab. Sampled data is displayed in real-time on
the Multimeter window.
(3) To close the Multimeter window, tap [Cancel].
Tip
• Tapping the [Store] button on the Multimeter window saves the current sample to a specified list
variable (EConSamp\MultList). See "Saving Sample Data from the Multimeter Window" on page
7-4 for more information.
7-2
Using the Multimeter Window
20031201