GE MultiLink Quick Start Manual page 63

MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE
Verify that the configuration file has been created and stored
correctly.
This completes the Save (original) Configuration procedure.
The following procedure describes how to upgrade the firmware:
Use the xmodem command:
ML800/1200/1600/2400# Xmodem get type=app
Do you wish to upgrade the image? [Y or N]
Select the Transfer menu item and choose the Send File option
Enter the location of the firmware file that has to be loaded into the
switch.
Select Xmodem as the protocol.
QUICKSTART GUIDE
Y
59