GE MultiLink Quick Start Manual page 65

MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE
Select the Transfer menu item and choose the Send File option.
Enter the location of the configuration file and select Xmodem for
the protocol.
Click on the Send button.
The file will start to load as shown below:
Once the transfer is complete, the switch will have to be rebooted
either by entering Reboot or by switching the power off then on.
ML800/1200/1600/2400# reboot
Proceed on rebooting the switch? [Y or N] Y
Rebooting now...
Once the switch has rebooted, login and verify that the configuration
was loaded correctly.
This completes the upgrade process.
QUICKSTART GUIDE
61