GE MultiLink Quick Start Manual page 40

QUICKSTART GUIDE
36
Select Use the following IP address then enter a unique IP address
(from 3.94.247.001 to 3.94.247.254 if using our test network address
range).
Enter the subnet mask which, if using our test network, will be
255.255.252.0.
Select OK, then OK again to exit the LOCAL AREA NETWORK
PROPERTIES menu.
Connect the computer's Ethernet port to the switch using a straight-
through cable.
Ensure that the link LED come on, on both the switch and PC.
MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE