Connecting To A Canon Bj Printer - Canon EOS 10D Digital Instruction Manual

Connect the Camera to the Printer

Connecting to a Canon BJ Printer

To connect the camera and printer with the necessary cable, refer to the manuals that came
with the printer.
BJ printer-connected icon
•
When disconnecting the cable from the camera's <
the plug instead of the cord to pull it out.
•
Do not use any cable other than the dedicated interface cable to connect the camera
and printer.
•
To disconnect the cable from the camera and printer, follow the procedure below:
1. Turn off the camera.
2. Disconnect the cable from the printer.
3. Disconnect the cable from the camera.
•
When you disconnect the camera from the printer, the <
disappear from the camera's LCD monitor and the camera will return to normal
playback.
•
Even while the camera is connected to the printer, you can instantly switch to
shooting by pressing the shutter button halfway (except during actual printing).
124
Follow steps
1
Card Photo Printer" to connect the
camera to the BJ printer.
Turn the camera's <
2
then press the <
An image in the CF card will be displayed.
s
Turn on the printer.
3
•
Press the printer's power button to turn it on.
The < > icon will appear on the camera's LCD
s
monitor.
The < > icon will appear on the printer's operation
s
panel.
To BJ printer
1 3
to in "Connecting to a
(→p.123)
> switch to <
> button.
> terminal, be sure to grasp
> icon or <
>,
> icon will