Using A Household Power Supply - Canon EOS 10D Digital Instruction Manual

Using a Household Power Supply

With AC Adapter Kit ACK-E2 (optional), you can connect the camera to a household power
outlet. Then you do not have to worry about exhausting the battery while using the camera.
•
Do not connect or disconnect the power cord while the camera's <
to < > .
•
Do not use the DC coupler with any camera other than the EOS 10D, D60, and D30.
26
Place the cord in the groove.
1
•
Carefully insert the cord into the groove without
damaging it.
Insert the DC coupler into the camera.
2
•
Open the cover and lower the covering on the cord
hole.
•
Insert the DC coupler and fit the cord into the cord
hole.
•
Check that the cord is placed tightly in the cord
hole, and slide the DC coupler into the compart-
ment until it locks into place.
•
Push down the cover until it clicks.
Connect the DC Coupler.
3
•
Connect the DC Coupler's plug to the AC adapter's
socket.
Connect the power cord.
4
•
Connect the power cord to the AC adapter.
•
Plug the cord into a power outlet.
•
When you are finished, remove the plug from the
power outlet.
> switch is set