Basic Operation; Main Switch; Shutter Button; Halfway Pressing - Canon EOS 10D Digital Instruction Manual

Basic Operation

Main Switch

The camera operates only after the <
•
To save battery power, the camera turns off automatically after 1 minute of non-
operation (auto power off / →p.142). To turn on the camera again, just press the
shutter button halfway.
•
Immediately after shooting, if you turn the <
may continue blinking for a few seconds while the CF card records the image.
After the image is recorded in the CF card, the access lamp will turn off and the
camera will turn off.

Shutter Button

The shutter button has two stages. You can press it down halfway or fully. The two levels of
shutter button operation are as follows:
If you press the shutter button halfway and (
moment before pressing it fully to shoot. If you press the shutter button fully without
pressing it halfway first or if you press the shutter button halfway and then press it fully
immediately, the camera will still take a moment before it shoots.
No matter what state the camera is in (image playback, menu operation, image
recording, etc., except during direct printing), pressing the shutter button halfway will
instantly make it ready for shooting.
30
> switch is set to < >.
< > : Set to this position when the camera is in
use.
< > : The camera does not operate.
Set to this position when not using the
camera.
> switch to <

Halfway pressing

Pressing the shutter button down halfway activates
autofocusing (AF), and also activates the automatic
exposure mechanism and sets the shutter speed and
aperture value.
The exposure (the combination of shutter speed and
aperture value) appears on the LCD panel and in the
viewfinder.

Full pressing

This releases the shutter and shoots.
) elapse, press it halfway again and wait a
>, the access lamp
( )