Installing and Removing the Battery
Installing the Battery
Load a fully charged BP-511 battery pack into the camera.
Battery Pack BP-512 can also be used.
Battery Level Icons
The level of charge remaining is shown in three stages when the <
(→p.30)
24
Open the battery compartment cover.
1
•
Slide the lever in the direction shown by the arrow
in the diagram, and open the cover.
Insert the battery into the camera.
2
•
Make sure the battery pack is facing the right way,
and insert it into the battery compartment.
•
Insert the battery pack until it locks into place.
Close the cover.
3
•
Press the cover closed until it clicks shut.
: Charge is sufficient.
: Charge is low.
: Battery pack must be recharged.
> switch is set to <
>.