Selecting AF Point
Automatic Selection
Manual Selection
Center AF point selected
With C.Fn-10-1, you can disable the AF point from flashing in red when focus is
achieved. (→p.149)
68
Display all the AF points in red.
•
Press the <
> button, then turn the <
<
> dial so that the viewfinder display looks as
shown in the illustration.
•
When you try to select an AF point beyond a
peripheral AF point, automatic focusing selection
will be set.
•
You can also set automatic AF point selection while
looking at the LCD panel.
Display the desired AF point in red.
•
To select the AF point, see "Selecting an AF Point."
(→p.67)
•
The selection sequence when the <
dial is turned is shown below.
•
You can also select the AF point manually while
looking at the LCD panel.
Automatic Selection
Automatic
Selection
Automatic Selection
> or
> and <
>
Automatic
Selection